With this article, we aim to update the latest information on PVC Wall Panels. Some latest varieties of these panels come in 3D designs and are somewhat different from normal PVC wall Panels which were quite common a few years ago. After reading this article you will be able to distinguish the key differences in the installation process and the outcome of installing the PVC wall panels. If you are looking for innovative interior design ideas, 3D PVC Panels offer exciting variety of decorative, rough-textured wall panels with patterns engraved into their surface. A wall finished with 3D PVC Wall Panels creates an enormous impact and lending an artistic feel to the area at a comparatively very little price. These are manufactured with base material having the thickness of 18mm polymer which is waterproof, light-weight, self-extinguishing and termite proof.
The versatility of PVC Panels
The PVC Wall Paneling is appropriate for application in both interiors and exteriors of the commercial as well as residential projects. Moreover, the installation method of PVC Panels extremely simple and can be learned without much effort. Here are the points we wish to discuss which will help you to install the PVC Wall Panels in your home or workplace with extreme ease.
Taking the measurements
First, you need to measure the wall or the ceiling properly and carefully where you wish to install the PVC Panels. While taking the measurement you have to keep in mind the windows area, door area, floor skirting area or any other area where the panels need not be installed or where the panels will be over lapped e.g. corners. Once that's done, you need to calculate the quantity of PVC panels required for the same but adding all the measurements form all the wall and ceilings. Do not forget that some special varieties of PVC panels are available in the dimensions that are different from normal PVC wall panels. So in those cases measurement have to be taken accordingly before installing them.
Preparation of sturdy base
For installation of PVC Panels in the interiors, you need to cut the adequate number of PVC Panel strips and metal channel exactly according to the measured size for panels. Then, screw them on the wall after a gap of each equal to the width of the PVC Panel module. The PVC Panel strips and aluminium channel becomes the sturdy base for the applying of the wall panels. On the other hand, for the installation of PVC Wall Panels on the exteriors, it is suggested to use an aluminium channel only. This is because metal acts as a stronger base and will support the PVC wall panels efficiently during the various seasons for a longer periods.
Fixing of PVC Wall Panels on the prepared base
After screwing the strips and creating a solid base, comes the time to cut the PVC Panels according to the dimensions of the wall making use of a panel saw, hand saw or a hand cutter. Next, you will need to affix PVC Wall Panels on the strips using screws, ranging from the border to the opposite side of the wall. Now place three or more screws at some distance on either side of the wall panels against the strips. In order to cover the screws or hide the gap between two PVC wall panels, you can apply silicon over them.
Choosing the design or do the paint
Another super advantage of PVC wall panels is that these are available in plain unfinished white colour as well, which are paintable with any colour of your taste and interests. The wall panels are created with special polymers, which make them impact resistant and hence appropriate for application on both the interiors and exteriors of the residential and commercial premises. They are 100% waterproof, termite proof, recyclable, fire retardant and are available with a lifetime guarantee. Adding to your delight, you'll find a large number of designs and patterns which can be previewed on the internet before placing an order.
Similarly some PVC panels are available in raw surface finish and are suitable for painting with acrylic or oil-based paints after the installation. The most effective results are achieved by the employing of a good quality primer before finishing. A rough-textured or sandstone type of paint can also be applied if you would like to avoid sanding the panels. Otherwise a 200 grade sandpaper is suggested. To minimize the chance of distortion, paint should be applied to any or all sides of the panel. The PVC material may expand and contract slightly almost like timber.
Convert your dull and boring interiors into spectacular work of art. PVC Wall Panels will transform normal interiors into spectacular and dramatic ones instantly. Now there is no need to get high-priced artworks or wall hangings paintings or other furnishings once the PVC Wall Panels are there on the wall. Be impressed by the numerous combinations of styles and finishes offered, permitting you to make your own distinctive wall.
By now you have might have cleared most of all of your doubts pertaining to PVC wall panels. Also, have some level of planning for how to go with the interiors of your home or office. The cost-effectiveness and trouble free installation advantage gives everyone the desired freedom to experiment and create something new and that too of your own.
To have more on the related topic you can visit our previous articles on PVC Wall Panels and do let us know if you have any more queries and we will provide you the handy information.